Semi-trailer tank design:
- Semi-trailer tank tank truck can have a container with a constant or variable cross-section shape and a variable number of sections at the request of the customer.
- The shape is in the form of an ellipse (bottle) or a circle.
- The tank is equipped with a ladder for climbing to the upper platform.
- The material used in the manufacture of the chassis is ST 37-A1 steel with a thickness of 6 mm.
- The material used in the manufacture of the tank is ST 37 steel with a thickness of at least 4 mm.
- The upper bay through the hatches of the neck covers, the gravity lower drain.
- With a diameter of 2" international SAE/DIN type, made of metal (42 Cr Mo 4).
- The support device is two-speed, g / n 25 (50) t., with manual one-way drive.
- Drain hose made of composite material L = 4.0 m, DN-75 (3") - 1 pc.
- ERDEMIR Steel Plant: https://www.erdemir.com.tr/homepage/
-
Bottom valves-1-7 pcs., manufactured by Arpesan (optional).
-
Pencil cases for drain hoses made of PVC - 2 pcs.
-
Kamlok 3 " quick-release connections on the drain sleeve.
-
The tank will be equipped with a 3" drain ball valve with the possibility of separate and centralized discharge (on request).
-
The number of sections is 1-7.
-
Fuel drain pump (optional).
-
The technological cabinet is made of steel.
-
It is located on the right side of the vessel, between the support device and the front axle of the trolley.
Semi-trailer axles:
- Semi-trailer axles, SAF Intradisc Plus Integral CD brand.
- The axles are made to European standards, pin 2" (50.8 mm), OMS supports, G. P. 24 tons each, one-way control two-speed control. Side protection according to EEC 89/297. Rear bumper according to EEC 97/19.
- Number of axles – 3 pcs.
- The maximum axle load of the semi-trailer is 12 tons.
- SAF Intradisc Plus Integral CD.
- Drum brakes.
- The first axis is the lifting one.
- "Z" - shaped parabolic springs, the distance between the axes is 1320 mm.
Semi-trailer brake system:
- Two-wire production of "Wabco", the drive of the parking brake from the energy accumulators on two axles.
- Two-channel anti-lock braking system EBS "Wabco".
- The system for locking the service brake system of the semi-trailer when draining fuel.
- Three-axis pneumatic system.
Electric semi-trailer system:
The 24V electrical equipment includes the following elements:
- Two seven-terminal and one 15-terminal sockets.
- ABS socket.
- Wiring harnesses for connecting elements of the lighting and alarm system.
- Two rear combined lamps that perform the functions of marker lights, turn indicators, brake signals, fog lights, reverse lights and lighting of the state registration plate.
- Two full-size lamps on a flexible base.
- Two front marker lamps, combined with retroreflectors.
- Eight side marker lights, with orange retroreflectors.
- The two rear retroreflectors are red, triangular in shape, and are part of the rear combination lights.
- The entire electrical system of the semi-trailer complies with European safety requirements.
- All cables and electrical components of the electric system of the semi-trailer fully comply with all fire safety requirements.
Tires/wheels:
- Drum, tubeless 6+1 wheels.
- Tires, brand Bridgestone or similar, dimension 385/65 R22,5 – 6+1 pcs.
- Steel wheels 11, 75x22,5 – 6+1 pcs.
Paint job:
- Pre-cleaning of the surface by chemical means, a layer of epoxy primer, after-applying the paint of the desired color. The tank is dried in a special chamber at 90°C.
Support and rotary mechanism (pin) of the semi-trailer:
- The semi-trailer slewing mechanism is made of hardened steel and can withstand double load according to SAE/DIN standards.
- The design of the semi-trailer's pivot mechanism makes it possible to dismantle and replace it if necessary.
Semi-trailer accessories:
- 1 pc, water tank, 2 tool cabinets.
- 2x inch drain hose 1 pc.
- 1 pc cabinet for fire fighting tool.
- Stairs for climbing to the upper platform.
- 1 piece 6-meter discharge sleeve 4".
- Working platform.
- Anti-rollback stop - 1 pc.
- The spare wheel mounting bracket.
- Non-slip pedestrian walkway-stairs.
- 2 cabinets for storing fire extinguishers.
- Mudguards made of hard plastic 6 pcs.
- Side and rear bumpers.
- Options for the manufacture of tanks: circle (constant, variable cross-section).
Warranty: One year.
The price includes the costs of production, pre-sale preparation, international delivery by INCOTERMS 2010 ferry, insurance, forwarding in the port, customs clearance, transportation in Ukraine, certification, entering into the AIS database, VAT, warranty service. Thus, the semi-trailer tank tanker will be delivered to the customer without any additional costs on his part. Payment is made by bank transfer in UAH.